A Type 1 standard spectrophotometer cuvette is a must own cuvette for your lab.  The Firefly Type 1 standard 10mm cell is our #1 seller for UV/VIS spectroscopy and comes in many various lightpaths and materials to fit your exact needs.

A mainstay of the FireflySci cuvette line, the Type 5 cuvette is a more cost-effective version of the Type 1 cuvette. With a rounded bottom, rather than 90º corners, it makes the cuvette easier to clean.

The Type 21 is FireflySci's standard PTFE-stoppered cuvette that is useful for any experiment that requires an airtight seal.

The Type 21FL is the fluorescent version of the Type 21 standard PTFE-stoppered cuvette. That is useful for any fluorometer experiment that requires an airtight seal.

The FireflySci Type 41 cuvette is our standard screw cap cell and is a favorite among scientists who perform anaerobic work. The open SEPTA screw cap enables researchers to make sterile injections into the cuvette without compromising the experiment.

The FireflySci Type 41FL cuvette is our standard fluorescence screw cap cell and is a favorite among scientists who perform anaerobic work. The open SEPTA screw cap enables researchers to make sterile injections into the cuvette without compromising the experiment.

The FireflySci Type 501 cuvette is a flow through cell with inlet and outlet tubes on the top and bottom of the cell.

The FireflySci Type 501FL cuvette is a flow through cell with inlet and outlet tubes on the top and bottom of the cell. All surfaces are optically polished.

A Type 1 standard spectrophotometer cuvette that comes with a circular groove, which fits a P73 Magnetic Stirrer. The P73 is agitated by a P82 magnetic cuvette stirrer and the rotating P73 creates a vortex, mixing the solution while not interfering with measurements.

P73 Stirrer included with cell.

FireflySci's fluorescent incarnation of the Type 11. This cell provides a transparent, airtight glass cap, which provides an airtight seal, ensured by the ground finish on the inside of the cap and the top of the cuvette.

Spectrophotometer cuvette with protruding neck and socket glass stopper design.

FireflySci's macro spectrophotometer flow through cell with detachable inlet/outlet quartz tubes. Enables a constant flow through the 2.8ml capacity observation chamber.