Assembly and Fluidic System for Type 526 Flow Cell. Can also be used on a wide range of custom flow cells.

Have a stubborn bit of residue on your cuvette? No fear, the Cuvette Squeegee is here!

A small amount of cleaning fluid and a few scrubs will keep your windows fresh and clean while not damaging them in the process.

Cuvette mount for Type 42 Circular Dichroism Disc Cells. This mount fastens the two sides of the disc together.

Cell mount for Type 4 micro cell, which enables it to fit in a standard 10mm cuvette holder.

A fast and easy way to clean your cuvettes.

These cuvette washers are designed to quickly clean and dry your cuvettes with no handling involved. 

Cuvette mount for rectangular cells with a lightpath of less than 5mm. 
This mount enables short pathlength cuvettes to fit in a 10mm cuvette holder.

Wingnut tool sets for adapting cuvettes to different z-dimensions

Cell mount for Type 507 and Type 607 micro cells, which enables them to fit in a standard 10mm cuvette holder.

Cuvette spacers for rectangular cells with lightpaths of 1mm, 2mm and 5mm. 

Closed 13-425 screw cap (comes with PTFE septa). Comes in both black and white.

100/pack Cleaning swabs for Micro Focus Cell and other cuvettes

Closed 13-425 Mininert screw cap. Enables users to minimize contact with the sample.

PTFE/silicone septa for closed and open screw caps (SC1 and SC2)

Silicone tubing for connecting to quartz tube flow through cells

A pair of M6 threaded connectors for use in Type 601, 602 and 606 tablet dissolution cells. The connector holds the PTFE tube firmly in place to seal it tightly against the quartz cell.

The dimensions of the supplied tubing is OD: 1.6mm, ID: 0.8mm and the length is 400mm.

Fill your cuvettes faster with these great 3ML transfer pipettes. 

Pipettes come in 10 pieces per bag.

Made from polypropelyne.

Cell holder rack for 12 standard size cuvettes.

Doubled-sided, high quality lens cloth with FireflySci logo. Great for cleaning optical surfaces.

Blank for use in UV/VIS calibration kits. 

Covers for various Firefly spectrophotometer and fluorometer cuvettes

PTFE stoppers for various Firefly spectrophotometer and fluorometer cuvettes

P67 Stirring Rod for manual stirring of a sample in a 10mm cuvette. Made from polyethylene.

Cuvette Add-a-mixer: Manual mixer fits any standard 10mm path length quartz or glass cell with a 4mm inside width or larger

Mini cuvette stirrer for use in semi-micro cuvettes and narrow-apertured cuvettes.

This PTFE magnetic centrifugal stirrer fits into a standard 10mm light path cuvette and provides rapid vertical and horizontal mixing with a minimum of vortexing when placed on a magnetic stirring machine.  

Stirs cell contents while measuring absorbance or fluorescence. Fits all standard spectrophotometers and fluorometers with a 10mm cuvette holder.