A fast and easy way to clean your cuvettes.

These cuvette washers are designed to quickly clean and dry your cuvettes with no handling involved. 

Cuvette mount for rectangular cells with a lightpath of less than 5mm. 
This mount enables short pathlength cuvettes to fit in a 10mm cuvette holder.

Cuvette spacers for rectangular cells with lightpaths of 1mm, 2mm and 5mm. 

Fill your cuvettes faster with these great 3ML transfer pipettes. 

Pipettes come in 10 pieces per bag.

Made from polypropelyne.

Cell holder rack for 12 standard size cuvettes.

Have a stubborn bit of residue on your cuvette? No fear, the Cuvette Squeegee is here!

A small amount of cleaning fluid and a few scrubs will keep your windows fresh and clean while not damaging them in the process.

Doubled-sided, high quality lens cloth with FireflySci logo. Great for cleaning optical surfaces.

PTFE stoppers for various Firefly spectrophotometer and fluorometer cuvettes

Cuvette holders for IR and FTIR instruments. Has a 3 inch x 2 inch back plate.

Small piece of this film will seal test tubes, cuvettes, beakers, flasks, culture tubes, etc

Plastic (opaque, black) case to hold 4 cells up to 10mm L/P each, or two 20mm L/P cells, or one 50mm L/P cell

Plastic (opaque, black) case to hold 6 cells up to 10mm L/P each, or three 20mm L/P cells