A fast and easy way to clean your cuvettes.

These cuvette washers are designed to quickly clean and dry your cuvettes with no handling involved. 

Cuvette mount for rectangular cells with a lightpath of less than 5mm. 
This mount enables short pathlength cuvettes to fit in a 10mm cuvette holder.

Cuvette spacers for rectangular cells with lightpaths of 1mm, 2mm and 5mm. 

Fill your cuvettes faster with these great 3ML transfer pipettes. 

Pipettes come in 10 pieces per bag.

Made from polypropelyne.

Cell holder rack for 12 standard size cuvettes.

Doubled-sided, high quality lens cloth with FireflySci logo. Great for cleaning optical surfaces.

Covers for various Firefly spectrophotometer and fluorometer cuvettes

P67 Stirring Rod for manual stirring of a sample in a 10mm cuvette. Made from polyethylene.

Cuvette Add-a-mixer: Manual mixer fits any standard 10mm path length quartz or glass cell with a 4mm inside width or larger

This PTFE magnetic centrifugal stirrer fits into a standard 10mm light path cuvette and provides rapid vertical and horizontal mixing with a minimum of vortexing when placed on a magnetic stirring machine.  

Stirs cell contents while measuring absorbance or fluorescence. Fits all standard spectrophotometers and fluorometers with a 10mm cuvette holder.

Small piece of this film will seal test tubes, cuvettes, beakers, flasks, culture tubes, etc

Plastic (opaque, black) case to hold 4 cells up to 10mm L/P each, or two 20mm L/P cells, or one 50mm L/P cell

Plastic (opaque, black) case to hold 6 cells up to 10mm L/P each, or three 20mm L/P cells