Type 501FL Macro Fluorescence Flow Through Cell (Lightpaths: 0.5-10mm)
from 319.00

The FireflySci Type 501FL cuvette is a flow through cell with inlet and outlet tubes on the top and bottom of the cell. All surfaces are optically polished.

Type 701MFL Sub-Micro Black Fluorometer Cuvette (Capacity: 10-160µl)
from 469.00

FireflySci's 10mm sub-micro fluorometer cuvette with capacities ranging from 10-160µl. 

P65 Series Cuvette Washers
from 109.00

A fast and easy way to clean your cuvettes.

These cuvette washers are designed to quickly clean and dry your cuvettes with no handling involved. 

Type 30FL Micro Fluorescence Cuvette with PTFE Stopper (Lightpath: 10mm)
from 157.00

Standard micro fluorometer cuvette with PTFE stopper. The narrower walls enables smaller sample sizes.

41FLUV10 with SC3.jpg
Type 41FL Macro Fluorescence Cuvette with Screw Cap (Lightpaths: 5-100mm)
from 172.00

The FireflySci Type 41FL cuvette is our standard fluorescence screw cap cell and is a favorite among scientists who perform anaerobic work. The open SEPTA screw cap enables researchers to make sterile injections into the cuvette without compromising the experiment.

50UV10.jpg
Type 50 Water Jacketed Cylindrical Polarimeter Cell with PTFE Stopper (Lightpaths: 5-50mm)
from 408.00

Firefly's cylindrical water jacketed polarimeter cell with PTFE stopper. The water jacket, which runs around the sample chamber will keep the chamber at a constant temperature.

4UV5X5.jpg
Type 4 Micro Fluorescence Cuvette with PTFE Cover (Lightpath: 5mm)
from 107.00

Firefly's micro fluorometer cuvette with PTFE cover.

522UV10.jpg
Type 522 Cylindrical Absorption Cuvette with Quartz Cover (Lightpath: 10mm)
from 304.00

Cylindrical absorption spectrophotometer cell with quartz cover.

523G10-FF.jpg
Type 523 Rectangular Absorption Cuvette (Lightpath: 10mm)
189.00

Firefly's 10mm rectangular absorption spectrophotometer cell. Mostly used in colorimetric applications.

21FLUV10 New Stoppers- FF.jpg
Type 21FL Macro Fluorescence Cuvette with PTFE Stopper (Lightpaths: 5-50mm)
from 83.00

The Type 21FL is the fluorescent version of the Type 21 standard PTFE-stoppered cuvette. That is useful for any fluorometer experiment that requires an airtight seal.

11UV10-FF.jpg
Type 11 Macro Cuvette with Glass Cap (Lightpaths: 1-50mm)
from 149.00

FireflySci's Type 11 cuvette comes standard with a glass cap, which provides an airtight seal, ensured by the ground finish on the inside of the cap and the top of the cuvette. 

The cap is polished, which enables optical transmission.

82UV10-FF.jpg
Type 82 Triangular Fluorescence Cell with PTFE Stopper (Lightpath: 10mm)
from 275.00

Triangular fluorescence cell with PTFE stopper.